Filter
Top Products
Solstice I12 Cooking Computer Service
Part # 60153301
L20-316 Rev 0
7
2.2.5 Product Key Naming:
Display shows [P hh.mm:ss] [NAME nn ] from the previous step. The first character is flashing to show
the cursor location. If the product name currently displayed is correct, press the key.
To change this character, press the key containing the letter. Press again, if needed, to get other
letters listed under the key. When the correct letter shows in the display, press the right arrow key
to move the cursor to the next character position. Use the left and right editing arrow keys
to move the flashing cursor. When naming is complete press the key. Edit mistakes
with the left/right arrow key and the CLEAR key. To clear a character, press the CLEAR key
CLEAR
.
This is also used to create a blank space character. Use the SHIFT key
SHIFT
to enter a number into a
character space. When editing is complete, press the key to save name.
Example: Change the
factory default name
for key4 to SHRIMP9:
Press [Clock]
Program key 4 for SHRIMP
9
Display shows [KEY 4 ] [NAME 4 ]
N is flashing at
cursor
location
Press key (PQRS) four
times until
S
shows
[KEY 4 ] [SAME 4 ] S is flashing
Press --> move to next
character
[KEY 4 ] [SAME 4 ] A is flashing
Press key (GHI) 2 times
until H shows
[KEY 4 ] [SHME 4 ] H is flashing
Press --> move to next
character
[KEY 4 ] [SHME 4 ] M is flashing
Press key (PQRS) three
times
[KEY 4 ] [SHRE 4 ] R is flashing
Press --> move to next
character
[KEY 4 ] [SHRE 4 ] E is flashing
Press key (GHI) three [KEY 4 ] [SHRI 4 ] I is flashing
Press --> move to next
character
[KEY 4 ] [SHRI-4 ]
"-" is flashing. "-" used as a
place holder for blanks.
Press key (MNO) one
time
[KEY 4 ] [SHRIM4 ] M is flashing
Press --> move to next
character
[KEY 4 ] [SHRIM4 ] 4 is flashing
Press CLR to clear
character (example)
[KEY 4 ] [SHRIM- ]
"-" is flashing. "-" used as a
place holder for blanks.
Press key key (PQRS) [KEY 4 ] [SHRIMP ] P is flashing
Press --> move to next
character
[KEY 4 ] [SHRIMP- ]
"-" is flashing. "-" used as a
place holder for blanks.
Press --> move to next
character
[KEY 4 ] [SHRIMP -]
creates a blank space
character
Press SHIFT key, then key
9
[KEY 4 ] [SHRIMP 9]
Entering a number with the
shift key. 9 is flashing.
Press Clock key
[KEY 4 ] [SHRIMP 9] (no flashing
cursor)
Edit mistakes with -->, <--,
and CLEAR keys
Press Clock key again [KEY 4 ] [SHRIMP 9]
Save this product label and
continue.
--> Forward space the flashing cursor.
<-- Back space the flashing cursor.
CLR Delete the current character insert
Enter product NAME on this key