Filter
Top Products
Steamer 625-502revA
Printed in USA 0910 © 20035
Steamer
625-A
Error Messages
CYCLES 2
9
The display now shows the product’s number of on-off water
valve cycles.
CYCLES 3
10
A. Press the UP or DOWN Arrow buttons to change the
number of water cycles.
B. Press the Steamer LOGO button to store the new water
cycle number and exit the Programming mode.
NOTE: Pressing the Product 3 button at any time exits the
Program mode without storing the change.
CYCLES 3
OFF 3.0
8
A. Press the UP or DOWN Arrow buttons to change the valve
OFF time.
B. Press the Steamer LOGO button to store the new valve
OFF time.
NOTE: Pressing the Product 3 button at any time exits the
Program mode without storing the change.
OFF 3.0
ERROR MESSAGES ACTION
No Heat Error. Call service technician.
11
The display now shows the current product set temperature.
255
TEMP 275
12
13
Platen temperature can be set between 129°-176°C (265°- 350°F).
A. Press the UP or DOWN Arrow buttons to scroll to the
desired temperature.
B. Press the Rapids Steamer LOGO button to store the desired
temperature.
NOTE: Pressing the PRODUCT 3 button at any time exits the
Program mode without storing the change.
The display now shows the time delay between when the
product is finished and when the alarm sounds.
A. Press the UP or DOWN Arrow buttons to scroll to the
desired time delay.
B. Press the Rapid Steamer LOGO button to store the desired
time and to exit the Programming mode. .
NOTE: Pressing the PRODUCT 3 button at any time exits the
Program mode without storing the change.
The delay can be set for 0.0 to 10.0 seconds.
5
AL DLY 2.5
TEMP 275