Filter
Top Products
13
Beyond the Basics
mixing your inputs
You can select any two of your connected audio sources and
mix them so one or both play through your sound system.
Mixing consists of three parts: playing an input source,
monitoring a second input source, and switching to a second
input source.
playing an input source
1. Set ASSIGN A to the desired audio source (1, 2, 3,
correspond to CH 1, CH 2, CH 3).
2. Slide CROSS FADER all the way to A.
3. Set PHONO 1/LINE 1, PHONO 2/LINE 2, or LINE 3/LINE 4 to the preset
input source you are going to play first.
4. Adjust the input source’s volume to it’s preset signal level
(see “presetting input signal levels” on Page 9).
5. Play the source.
CUE
CUE LEVEL
CUE/PGM
CROSS FADER
ASSIGN A and ASSIGN B
PHONO 1/LINE 1 PHONO 2/LINE 2 LINE 3/LINE 4