Filter
Top Products
5
Oven accessories
The oven is supplied with a wire shelf and an enamelled
grill pan, with a trivet and a handle. The wire shelf slides into
the wire supports located on either side of the oven interior
(Fig.2-9).
Removing the shelf
Pull the shelf forward until the back of the shelf is up to the
shelf stop (Fig.2-10). Lift the front of the shelf so the stop
clears the wire support and pull clear (Fig.2-11).
Refitting the shelf
To refit the shelf, line up the shelf with the shelf supports and
slide it between the two support wires until the shelf stop hits
the wire support. Lift the front of the shelf so that the stop
clears the support, then lower the front so that the shelf is
level and push it back fully.
The shelf guard should be at the back pointing upwards.
ArtNo.325-0033 Oven BI shelf
ArtNo.320-0011 Removing the shelf 1
ArtNo.320-0012 Removing the shelf 2
Fig.2-9
Fig.2-10
Fig.2-11
A – Shelf guard, B – Front, C – Shelf stop
Key