Filter
Top Products
5
Essential information
Allow the cooker to cool and then isolate the electricity
supply before carrying out any thorough cleaning.
Never use paint solvents, washing soda, caustic
cleaners, biological powders, bleach, chlorine based
bleach cleaners, coarse abrasives or salt. Do not
mix different cleaning products – they may react
together with hazardous results.
All parts of the hob can be cleaned with hot soapy water
– but take care that no surplus water seeps into the appliance.
Remember to switch on the electricity supply before re-using
the cooker.
We have developed a range of cleaning products that give
maximum performance without damaging the hob surfaces.
More information is available through the Cookware Collection
brochure supplied with your cooker and our website, www.
rangemaster.co.uk.
Regular cleaning is recommended. For easier cleaning, wipe
away any spillages immediately.
Hotplate Burners
The burner heads and caps can be removed for cleaning
(Fig.3-1). Make sure they are absolutely dry before replacing
them.
The single ring burners
When refitting the burner head, ensure that the notch and
opening lines up with the electrode in the base. Check that
the burner head is level and that the cap is fitted centrally on
the burner head.
Cleaning Table
Refer to the cleaning tables (Table 3-1 and Table 3-2) for
details on cleaning the hob.
The cleaners listed are available from supermarkets or
electrical retailers. For enamelled surfaces use a cleaner
that is approved fro use on vitreous enamel. The Vitreous
Enamel Association has a list of approved suppliers.
Contact them via their website www.ive.org.uk or
telephone: 01527 893031.
3. Cleaning Your Hob
ArtNo.316-0007 Gas burner
Fig.3-1
ArtNo.050-0009 Cleaning table 1
ArtNo.050-0010 Cleaning table 2
Table 3-1 Cleaning the hotplate
Table 3-2 Cleaning outside the hotplate
A – Cap, B – Head, C – Notch, D – Base, E – FSD , F – Electrode
DocNo.041-0001 - Cleaning - BI hob gas 4-element