Filter
Top Products
9
90 - 140 mm
600
Adjusting the Feet
Make sure that the appliance is on solid level ooring. If the
refrigerator is placed on a plinth, at, strong and re resistant
materials must be used.
This fridge has front adjustable feet, which can be used to
level the appliance.
To accesss the levelling feet, rst undo the screws on each
side of the grid (Fig.4-5). Remove the grid.
Using a suitable spanner, adjust the feet. Turn the spanner
clockwise to raise the feet and counter-clockwise to lower the
feet (Fig.4-6).
The appliance should be ush with the underside of the
worktop and be level.
IMPORTANT: If the appliance is not level, then the door and
door seal may be aected.
Ret the grid and secure in place.
Fitting the Plinth
You may decide to attach a plinth to match your existing
kitchen units.
Cut clearance in the plinth for ventilation (Fig.4-7) and then
t.
ArtNo.600-0059 - BILF - Adjusting the feet
Fig.4-6
Fig.4-5
Fig.4-7