Filter
Top Products
43
Chapter 5. Changing Various Settings
Power-up default setting
OFF
■
Changing How 3D is Applied
(3D Mode)
The method used in applying the 3D function’s sense of
depth changes according to whether or not headphones are
connected.
You can change this setting.
1.
Hold down the [Split] button, and press the [Reverb]
button.
The DP-970 switches to the function mode.
2.
Press the [3D] button.
The following appears in the display.
Power-up default setting
1
Preventing the Settings from
Changing During Performance
■
Disabling Everything Except
Piano Play (Panel Lock)
The “Panel Lock” function locks the DP-970 in a state where
only piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
In the Panel Lock state, only the grand piano sound can be
played.
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
2.
Hold down the [Piano] button and press the [Power]
switch to turn on the power.
Continue holding down the [Piano] button until
following appears in the display.
fig.disp—-
All buttons are disabled.
3.
Adjust the volume.
When you play the keyboard, the grand piano sound
will be heard.
To defeat the Panel Lock function, turn the volume
down to the minimum, and turn on the power once
again.
■
Disabling the Buttons When
Using a Tone Other Than Piano
(Tone Lock)
Even when using Tones other than the Piano, you can set the
instrument so all of its buttons are disabled (the settings in
effect at that time will be maintained).
1.
Hold down the [Demo] button and press the [Key
Touch] button.
Continue holding down the [Demo] button and the [Key
Touch] button until following appears in the display.
fig.disp—-
The song or the metronome sound that is playing will
stop.
All buttons are disabled while the instrument is set like
this.
To cancel the Tone Lock function, once again hold down
the [Demo] button while you press the [Key Touch]
button. Alternatively, you can lower the instrument’s
volume all the way and switch its power off. Then, turn
it on again.
Display
Descriptions
On
The damper pedal effect will be applied to
the sound of the left and right hand keyboard
area.
OFF
The damper pedal effect will not be applied
to the sound of the left-hand keyboard area.
Display
Descriptions
1
When the headphones are connected, the
depth effect is optimized for headphones, and
when no headphones are connected, the
optimal depth for speakers is applied.
2
The optimal depth for speakers is used,
regardless of whether or not headphones are
connected.
3D is also applied to the sound output from
the Output jacks, making this convenient
when you want to play through speakers
connected to the Output jacks.
3
The optimal depth for headphones is used,
regardless of whether or not headphones are
connected.
DP-970_e.book 43 ページ ２００７年１月１６日 火曜日 午後１時４２分