Filter
Top Products
46
Chapter 6. Connecting External Devices
Connecting MIDI Devices
By connecting an external MIDI device and exchanging
performance data, you can control the performances on one
device from the other. For instance, you can output sound
from the other instrument or switch tones on the other
instrument.
■
What’s MIDI?
MIDI stands for Musical Instrument Digital Interface, an
international standard which allows performance information
to be communicated among electronic musical instruments and
computers.
The DP-970 provides MIDI connectors, which allow
performance data to be exchanged with external devices. When
these connectors are used to connect the DP-970 to external
devices, an even wider range of possibilities becomes available.
→
For details on MIDI functionality and operations, refer to
MIDI implementation. You can download the MIDI
implementation from
http://www.roland.com/
Connection Examples
921
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing the DP-970 from a MIDI sequencer/
Recording an DP-970 performance on a MIDI
sequencer
fig.midi2.e
* Set Local Off if you have connected the DP-970 to a MIDI
sequencer. Refer to “Switching Local Control on and Off” (p.
47). Also set your MIDI sequencer to MIDI Thru mode (so
that messages received at MIDI IN will be re-transmitted
without change from MIDI OUT). For details, refer to the
owner’s manual of your MIDI sequencer.
Perform on the DP-970 to play a MIDI sound
generator
fig.midi1.e
Making MIDI-related Settings
Here’s how you can set the transmit channel and other MIDI-
related settings.
How to enter function mode
1.
Hold down the [Split] button and press the [Reverb]
button.
The DP-970 switches to the function mode.
The indicators for the [Split] and [Reverb] buttons and
the button to which the function is assigned start
flashing.
Setting various functions
2.
Press the button to which the desired function is
assigned.
The indicators for pressed button, [Split] button, and
[Reverb] button flash.
For details on the contents of each function, refer to the
explanations that follow.
3.
Press the [-] or [+] button to change the value.
If you press the [-] and [+] buttons simultaneously, the
setting will return to the original value.
How to exit function mode
4.
Press either the [Split] button or the [Reverb] button.
The button’s indicator will return to the previous state.
■
MIDI Send Channel Settings
MIDI features sixteen MIDI channels, numbered 1–16.
Simply connecting a cable is not enough for communication
to take place. The connected devices must be set to use the
same MIDI channels. Otherwise, no sound will be produced,
and no sounds can be selected.
* The DP-970 receives all channels 1–16.
1.
Hold down the [Split] button, and press the [Reverb]
button.
The DP-970 switches to the function mode.
2.
Press the [Strings] button.
The following appears in the display.
fig.disp-1
Value
1–16
Power-up default setting
1
DP-970
MT Series
* MT-90s has no MIDI Out connector.
InOut
MIDI
DP-970
Sound Module
OUTTHRU IN
MIDI
DP-970_e.book 46 ページ ２００７年１月１６日 火曜日 午後１時４２分