Using the automatic ice
maker
The ON/OFF lever is a wire signal arm.
l
ON (down) . . .
to start ice production
l
OFF (up) . . .
to stop ice production
. . .
NOTE:
Donot ice &r ON until
hed to the back of the
.
refrlw
cabinet.
Solving common ice maker problems
Raise signal
arm to stop
ke maker.
Lower signal
arm
to start
ice maker.
PROBLEM
Ice crescents
attached at
corners
Ice maker
won’t
make ice
Off-taste or
odor in ice
CAUSE
SOLUTION
l
It is normal
l
They break apart easily.
l
ON/OFF lever in the
l
Move ON/OFF lever to the ON (down)
OFF (up) position
position.
l
Freezer not cold
l
Ice maker will not operate until freezer is
enough
coM enough to make ice. This couM take
overnight.
l
Ice attracts airborne
l
Dump old ice and make a new supply.
odors; okl ice
Store excess ice in a covered container.
l
Poor water quality
l
Water containing minerals (such as suffur)
may require
a
filter. Try to avoid softened
water supplies.
l
Foods not properly
l
Wrap food properly. See pages 20 and 21.
wrapped
l
Ice bin and freezer
l
Clean freezer
and
ice bin. See cleaning
need cleaning
chart on page 17.
l
Plumbing to ice maker
l
Follow Installation Instructions for proper
ice maker water supply hookup. (See back
of refrigerator cabinet.) Try to avoid
softened water supply.
l
New ice maker
l
Rrst few batches of ice from a new ice
maker may have an off-taste. Dump ice
and make a new suppfy.
11