Filter
Top Products
Changing the control settings
If you need to adjust temperatures in
l
Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings listed
l
Wait at least 24 hours between adjustments.
in the chart below as a guide. If you have
questions, call us. (See page 23.)
l
Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
RECOMMENDED
CONTROL SElllNGS:
Refrigerator 4
Freezer A
Refrigerator 3
Freezer
C
If Refrigerator
Section is
TOO COLD
Controls not set correctly
Refrigerator 2
for your conditions
Freezer
6
If ICE isn’t
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold mom
temperatures
Refrigerator 3
Freezer C
Refrigerator 4
Freezer
6
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way
you use your refrigerator. Glass shelves are
strong enough to hold bottles, milk and other
heavy food items.
To remove shelves:
1.
Remove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf up at back.
4. Pull shelf straight out.
To replace shelves:
1.
Guide the rear hooks into the slots in the
shelf supports.
2. Tilt up front of shelf until hooks drop into
slots.
3. Lower front of shelf to level position.
Glass shelves
are
heavy.
Handle them
with care.
8