Filter
Top Products
A. LED
Lights when a button is pressed indicating IR output.
B. POWER BUTTON
Turns the unit on. The MAIN POWER switch on the rear of the unit must
be on first for this button to be active.
C.
UP BUTTON
When no menu is present on-screen, this button will toggle you through
the different aspect ratios.
When the menu is on-screen, the up button will move the cursor up within
a menu.
D.
LEFT BUTTON
When no menu is present on-screen, this button will toggle you through the
four different sources, in the order of:
When an adjustment function has been selected (i.e. Brightness), the
LEFT button will decrease the value of that function.
E.
DOWN BUTTON
When no menu is present on-screen, this button will toggle you through
the different aspect ratios.
When the menu is on-screen, the down button will move the cursor down
within a menu.
F.
RIGHT BUTTON
When no menu is present on-screen, this button will toggle you through
the four different sources, in the order of:
When an adjustment function has been selected (i.e. Brightness), the
RIGHT button will increase the value of that function.
G. MENU BUTTON
The MENU button brings up the main adjustment menu. After making
adjustments, the MENU button will bring you back to the sub-menu, then
the main menu. The Menu will then either time-out after approximately 10
seconds, or pressing the MENU button will remove the menu immediately.
H.
ENTER BUTTON
When an item is highlighted on the On-Screen Display, the ENTER button
will select the item.
I.
PROGRAM BUTTON
Reprogramming of the remote control with lost memory.
PASS THROUGH COMPONENT S-VIDEO COMPOSITE
COMPOSITE S-VIDEO COMPONENT PASS THROUGH
FRONT AND REAR PANEL DESCRIPTIONS
Remote Control Description
J. DIRECT
ACCESS
BUTTONS
These buttons are a shortcut that allow you to go directly to a particular
source of Aspect Ratio, as well as provide discreet ON/OFF commands.
These buttons are:
1. Composite Video Source Selection
2. S-Video Source Selection
3. Component Video Source Selection
4. Not used
5. Pass-Through
6. Not used
7. Anamorphic Aspect Ratio Selection
8. 4:3 Aspect Ratio Selection
9. Letterbox Aspect Ratio Selection
ON: Discreet ON Command
OFF: Discreet OFF Command
M
R
UNCO
PWR
A
B
C
D
E
J
F
G
H
I
12 3
45 6
78 9
I
N
P
U
T
0
N
P
U
T
I
OFF
ON
10