How to use
14
Adjusting salt consumption
4
2
3
1
1. Move the programme dial to the Reset position (1) and press the power button to the
off position.
2. After switching the programme dial to the Reset position, press the Start/Pause button
and hold it own.
3. At the same time that the Start/Pause button is held down, press the On/Off button to
switch the machine on (2).
4. Keep Start/Pause button held down until the monitor lights illuminate (2).
5. After lights ‘Wash/Dry/End’ have flashed (3), release the Start/Pause button (2).
6. Your machine displays the latest entered water setting.
7. You can adjust the levels by pressing the Start/Pause button (2) according to the table
of hardness settings above.
8. After adjusting the water hardness level, press the On/Off button (4) to save the
settings in memory.
Detergent Use
Only use a detergent that is specifically designed for domestic dishwashers. Detergent
should be put into the compartment located on the inside of the door in prior to starting
the machine. Do not overfill the detergent department or this may damage your dishes.
For more information regarding the use of detergent, contact the detergent manufacturer.
Filling the detergent compartment
Push the latch to open the detergent container as shown in image 1. Insert either a
dishwasher tablet or powder detergent into the larger of the 2 compartments (b). If you
are washing heavily soiled items, pour a small amount (5cm³) into the prewash section of
the tablet dispenser (a).
4
2
1
3