Russell Hobbs RHM2505 Microwave Oven User Manual


 

6(77,1*7+(&/2&.
Your microwave oven is equipped with a clock, you must set the clock when you first install your oven or after a power failure.
1. In standby mode, press TIMER/CLOCK button for 3 seconds until the LED displays “ENTER”, “TIME”, “CLOCK”
& “Hr 24”.
2. Press TIMER/CLOCK button again if you want to set 12 hour clock, and the screen will show “ENTER”, “TIME”,
“CLOCK”&“Hr12”.
3. Press number pads to enter the clock time.
4. Press TIMER/CLOCK button again to confirm.
For example: Set the current time to 8:30 in 12 hour clock.
1. In standby mode, press TIMER/CLOCK button for 3 seconds until the LED displays “ENTER”, “TIME”, “CLOCK”
& “Hr 24”.
2. Press TIMER/CLOCK button again and the screen will show “ENTER”, “TIME”, “CLOCK” & “Hr 12”.
3. Press number pads “8”, “3” & “0” to enter the clock time.
4. Press TIMER/CLOCK button again to confirm.
0,&52:$9(&22.,1*
G
To cook with microwave, time and power level should be set. The longest cooking time to be set by touching the
number pads is 99 min and 99 sec. You can press POWER LEVEL during cooking to check cooking temperature.
1. Press POWER LEVEL to select the microwave cooking and the display shows “MICRO” and the power level.
2.
Press number pads to enter cooking time until the correct cooking time is displayed and the screen will show
“ENTER”, “COOK” “TIME” & “MICRO”.
3. Press START pad to start cooking.
Example: Setting cooking time of 20 minutes on power 80%
1. Press POWER LEVEL to 3 times to select 80% microwave cooking and the display shows “MICRO” and P-80.
2. Press number pads “2”,”0”,”0”,”0 ”to enter cooking time until 20:00 is displayed and the screen will show
“ENTER”, “COOK” “TIME” & “MICRO”.
3. Press START to start cooking.
When the cooking is finished, the oven will display END and beep every two minutes until the oven door is opened or
any button is pressed.