Russell Hobbs RHM2505 Microwave Oven User Manual


 

3. Press number pads to enter the cooking time.
4. Press START to start cooking.
Example: set a micro+convection cooking program for 1 hour at 140ć.
1. In standby mode, press MICRO.+CONVECTION once. And the LED will show “ENTER”,”CODE”, “MICRO”,
“CONV”
2. Press number pad 2 to select 140ć. And the LED will show “ENTER”,”COOK”, “TIME”, “CONV”,”MICRO” and
140ć.
3. Press number pads “1”,”0”,”0” to enter the cooking time. “1H:00” will show on the screen.
4. Press START to start cooking.
NOTE:When the cooking is finished, the oven will display END and beep every two minutes until the oven door is
opened or any button is pressed. And the LED will show “COOK” , “CONV” & “MICRO”.
08/7,67$*(&22.,1*
Your oven can be programmed for up to 3 automatic cooking sequences. You can set a cooking program and then
enter another cooking program instantly before pressing START button. However, QUICK START, WEIGHT
DEFROST, REHEAT with CONVECTION and AUTO COOK cannot be set in a multi-stage cooking program.
1. Set a cooking program without pressing START button.
2. Set another cooking program.
3. Press START to start cooking.
Example: to set a multi-stage cooking program involving the below cooking stages
1
st
stage:100% microwave cooking for 20 minutes.
2
nd
stage: 60% microwave cooking for 10 minutes.
3
rd
stage: 40% microwave cooking for 10 minutes.
1. Press POWER LEVEL button once and the display shows ”P-HIǃMICRO”.
2. Press number pads to enter cooking time until 20:00 is displayed and the screen will show “ENTER”, “COOK”
“TIME” & “MICRO”.
3. Press POWER LEVEL button 5 times and the display shows ”P-60ǃMICRO & MEM”.
4. Press number pads to enter cooking time until 10:00 is displayed and the screen will show “ENTER”, “COOK”
“TIME”, “MICRO” & “MEM”.
5. Press POWER LEVEL button 7 times and the display shows ”P-40ǃMICRO & MEM”..
6. Press number pads to enter cooking time until 10:00 is displayed and the screen will show “ENTER”, “COOK”
“TIME”, “MICRO” & “MEM”.
7. Press START to start cooking.
NOTE:When the cooking is finished, the oven will display END and beep every two minutes until the oven door is
opened or any button is pressed.