Filter
Top Products
7,0(5
Use the timer feature, when you need to be reminded of the cooking or some other things. The timer can be set at any
cooking mode or standby mode. The longest time you can set is 99 minutes and 99 seconds.
1. Press TIMER/CLOCK pad once, the LED will appear “ENTER”,”TIMER”,”TIME” and “:” is flashing.
2. Press number pads to enter the time.
3. Press START to confirm.
Example: to set the timer for 20 minutes.
1. Press TIMER/CLOCK pad once, the LED will appear “ENTER”,”TIMER”,”TIME” and “:” is flashing.
2. Press number pads “2”,”0”,”0”,”0” to enter the time.
3. Press START to confirm.
NOTE: During the time is counting down, you can press TIMER/CLOCK pad to check the timer, you could also cancel
this function by pressing STOP/CANCEL pad within 5 seconds.
48,&.67$57
In the standby mode, press the QUICK START button once, the oven will start to cook with 100% power for 30 sec.
Each additional press on the QUICK START button will increase the cooking time for another 30 sec for 0 to 1
minute, and 60 sec for 1 minute to 10 minutes, and the longest time for this setting can be added up to 10 minutes.
Example: To cook for 2 minutes with 100% power
Press QUICK START button 3 times, the LED displays “ENTER”,”COOK”,”TIME” & ”MICRO” and the cooking time will
increase to 2 minutes. The oven starts cooking immediately at full microwave power.
&+,/'/2&.
Lock: In standby state, press STOP/CANCEL over 3 seconds, a “beep” will be heard denoting entering the
children—lock state, and the lock indicator “LOCK” will be illuminated.
Unlock: In locked state, press STOP/CANCEL over 3 seconds, a long “beep” will be heard denoting entering the lock
is released, and the “LOCK” will be disappeared.
$8720$7,&3527(&7,210(&+$1,60
Anytime in the operation of the oven, when the oven cavity temperature reaches a phenomenon of 250°C, the oven
automatically enters into self protection mode with the screen displaying error code E 01 and beeps can be heard. As
soon as this malfunction disappears by pressing STOP/CANCEL, the oven will back to normal.
Error may also occur to the system sensor, which will make the oven enter into protection mode with the screen
displaying E 03, and beeps can be heard. As soon as this malfunction disappears by pressing STOP/CANCEL, the
oven will back to normal.