Filter
Top Products
USING THE WATER DISPENSER (OPTIONAL)
15
INSTALLING A REGULAR BOTTLE
Press the fixing lever, lift the exclusive water tank
upwards, then remove it.
Remove the water supply device from the exclusive
water tank, then set the inner groove of the water
supply device in a regular mineral water bottle and
fix-it in position by turning it.
Turn the water supply device over, then fix-it in
position in the fixing hole.
• Gurgling sounds may be heard when air enters the water bottle from regular mineral water or
beverage bottles.
• Some regular mineral water or beverage bottles may not fit the water supply device, depending
on their size.
• If water does not come out satisfactorily when you press the “push” lever, press it again.
• Do not use carbonated drinks, such as coke, cider or sodas. When you press the button, the
beverage may spurt out due to the pressure of carbonic gas accumulated in the upper part of
beverage bottle.
• For better hygiene, beverages with a high sugar content (juice, soft drinks) are not
recommended.
• You can use bottled mineral water or boiled tap water unless it does contain any particles.
Note
WHEN THE WATER DISPENSER IS NOT USED, THE FOLLOWINGS ARE RECOMMENDED
FILLING THE WATER TANK
DA99-01220J-EN-1(0.2).indd 15 2007.3.7 4:33:6 PM