Filter
Top Products
24
REVERSING THE DOOR SWING
13. Remove the COVER LEG FRONT
COVER by removing the screws.
14. After tilting backward the refrigerator slightly
for the convenience of the operation,
disassemble the ASSY HINGE LOW as
shown and put the AUTO GUIDE upside
down, switch the position of the SHAFT.
15. Switch the position of the CAP HOLE HINGE
MID and a screw.
17. Fit the Fridge door into the ASSY HINGE
MID.
18. Secure the ASSY HINGE UPP with
bolts as shown. Be careful not to drop
the Fridge Door.
16. Assemble the ASSY HINGE MID with a
screw and two bolts.
-
ASSEMBLY OF THE FRIDGE DOOR
ASSY
HINGE LOW
AUTO GUIDE
COVER LEG
FRONT COVER
When joining, tighten a screw not to
make unpredicted noise.
Note
DA99-01220J-EN-1(0.2).indd 24 2007.3.7 4:33:14 PM