Filter
Top Products
REVERSING THE DOOR SWING
• Before reversing the door, ensure first that the refrigerator is disconnect by the plug from the
mains. You should take out contents and accessories like door guard from the doors. Be
careful not to drop the doors during dissembling or assembling.
Warning
- Read these instructions completely and carefully
1. Handle parts carefully to avoid scratching the paint.
2. Lay out all the screws by their related parts to avoid using them in the wrong places.
3. Provide a non-scratching work surface for the doors. (ex:blanket)
4. During door reversing, refrigerator should not be stained with oil.
screwdriver 7/16" inch wrench
- TOOLS YOU WILL NEED - ADDITIONAL PARTS
Cover Wire Hinge, R
HOW TO INSTALL DOOR HANDLES
21
4. Attach an 'ASSY HANDLE'on the door
with special screws.
When attaching the other "ASSY HANDLE",
follow the same order as mentioned. When
you disassemble them, just follow
the reverse order.
5. Cover screws with "COVER SLIDER
HANDLE"s.
COVER
SLIDER
HANDLE
SPECIAL
SCREW
DA99-01220J-EN-1(0.2).indd 21 2007.3.7 4:33:11 PM