Filter
Top Products
23
-
DISASSEMBLY OF THE FREEZER DOOR
REVERSING THE DOOR SWING
7.
Switch the direction of the electric wire as below.
Take out the COVER WIRE HINGE, L from the
inside of the CAB CABI, and rejoin it with the
electric wire. Make sure the length of the electric
wire is more than 150mm.
9.
After rejoining the COVER WIRE HINGE, L and the
ASSY HINGE UPP and switching the position of the
GROMMET HINGE and the CAP SPACE DOOR
reposition the ASSY HINGE UPP and cover the
COVER WIRE DOOR as shown.
(The electric wire
should be inside of the COVER WIRE DOOR)
11. After unscrewing and removing two bolts,
disassemble the ASSY HINGE MID.
12. Disassemble the Freezer Door by lifting
it upward. Be careful not to drop and
scratch the Freezer Door.
10.
Switch the position of the STOPPER
DOOR and the GROMMET HINGE as
shown.
8. Switch the position of the SHAFT upside
down on the other side of the ASSY HINGE
UPP. After detaching the SHIM, reattach it on
the other side of the HINGE UPP
COVER WIRE HINGE,L
STOPPER DOOR
GROMMET HINGE
SHAFT
SHIM
GROMMET
HINGE
GAP SPACE
DOOR
ASSY
HANGE MID
DA99-01220J-EN-1(0.2).indd 23 2007.3.7 4:33:13 PM