Filter
Top Products
14_ Surface cooking
induction cooking
ABOUT INDUCTION COOKTOP COOKING
CAUTION
BEFORE COOKING
Do not use the Induction cooktop surface as a cutting board.•
Do not place or store items that can melt or catch fire on the Induction cooktop, even •
when it is not being used.
Turn the Induction on only after placing the cookware on them.•
Do not store heavy items above the cooktop surface. They could fall and damage it.•
CAUTION
DURING COOKING
Metallic objects such as knives, forks, spoons and lids should not be placed on the •
induction surface since they can get hot.
After use, switch off the induction element by its control and do not rely on the pan •
detector.
This appliance is to be used only for normal cooking and frying in the home. It is not •
designed for commercial or industrial use.
Never use the induction for heating the room.•
Take care when plugging electrical appliances into a power outlet near the cooktop. •
Power cords must not come into contact with the cooktop.
Overheated fat and oil can catch fire quickly. Never leave surface units unattended •
when preparing foods in fat or oil, for example, when cooking chips.
Turn the cooking zones off after use.•
Always keep the control panels clean and dry.•
Never place combustible items on the induction. It may cause fire.•
Do not use the induction to heat aluminium foil, products wrapped in aluminium foil or •
frozen foods packaged in aluminium cookware.
There is the risk of burns from the appliance if used carelessly.•
Cables from electrical appliances must not touch the hot surface of the induction or •
hot cookware.
Do not use the induction to dry clothes.•
Never store flammable materials such as aerosols and detergents in draws or •
cupboards under the induction.
WARNING
Users with Pacemakers and Active Heart Implants must keep their upper body at a •
minimum distance of 1 ft. (30cm) from induction cooking zones when turned on. If in
doubt, you should consult the manufacturer of your device or your doctor.
FTQ307NWGX_XAA DG68-00228A.indd 14 2009-06-30 1:54:28