Samsung RF32FMQDBSR Refrigerator User Manual


 
setting up _11
01 SETTING UP
DISASSEMBLE THE FREEZER
DOORS
• Be sure to remove the Fridge Door
before removing the Freezer Door.
• Be careful with the wires attached to
the bottom of the Freezer Door while
disassembling.
1. With the door open, remove the screw holding
the cover (A) of the Adjustable Leg at the
bottom of the door with a Phillips (+)
Screwdriver, and then disassemble the
Connector (B).
2. Lift up and remove the Mid Hinge Cap (C) on
the Door Hinge above the Freezer Door.
3. While pushing the door in the direction of the
arrow, lift up the Mid Hinge Shaft (D).
4. Being careful that the door does not touch the
Mid Hinge (E), tilt the Door forward a little, and
then lift it up to remove.
CAUTION
A
B
C
D
1
2
E
RE-ATTACHING THE
REFRIGERATOR DOORS
• Be sure to re-attach the Freezer Door
before re-attaching the Fridge Door.
• Before re-attaching, make sure that all
the wire connectors at the bottom of the
Freezer Door are connected.
How to Re-attach the Freezer Door
1. Insert the door into the lower hinge (A) in the
direction of (1) and then push the door in the
direction of (2). Take care not to scratch the
door with the Mid-Hinge (B).
• Be careful not to damage the wires on
the bottom of the door. Avoid stepping
on them, etc.
2. Insert the Hinge Shaft (C) into the Mid Hinge
Hole (D) and put on the Hinge Cap (E).
When assembling the Hinge Shaft and the
Hinge Cap, be sure to assemble them in
the correct direction.
3. With the door open, join the connectors on the
bottom of the door.
- Be careful not to step on or damage the
connectors.
CAUTION
1
2
A
B
CAUTION
C
D
E
DA68-02918A-02.indb 11 13. 12. 2. �� 5:05