Filter
Top Products
12_ setting up
4. Attach the Adjustable Leg Cover using a Phillips
(+) Screwdriver.
How to Assemble Fridge Door
1. Attach the detached Fridge Door to the Mid
Hinge.
2. Slide the Fridge Hinge (C) into the fixing slot,
and then press it down so that it is aligned with
the hole in the door.
3. Inserting the Fixer Lever (B) in the direction of
the arrow, and then flip it down to assemble.
4. Assemble the Wire Connector.
C
B
B
5. Connect the Water Tube [E]. If the model has
red clips, attach them now to the Coupler [F].
Connect the connector [G] on the left door and
the connector [H] on the right door.
Red Clip
(6.35mm)
G
E
H
F
6. Attach the front of the Top Cover, and then
press down on its back until it lies flat. Re-
attach the screws.
• Assemble the Fridge and Freezer doors
in the reverse order of disassembly.
• If the Wire Connectors are cross-
assembled, the display will not work
properly.
• Clips are located inside the cap on the
top.
• To prevent water leaks, if the refrigerator
uses red clips, make sure the red clips
are properly connected to the Coupler
after you insert the Water Tube [E] into
the center of the Coupler.
Center of the
Indicator Line
clip A
(6.35 mm)
E
CAUTION
DA68-02918A-02.indb 12 13. 12. 2. �� 5:05