Filter
Top Products
operating _19
02 OPERATING
Reverse Osmosis Water Supply
IMPORTANT:
The pressure of the water supply coming out of a
reverse osmosis system going to the water inlet
valve of the refrigerator needs to be between 35
and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to
be a minimum of 40 to 60 psi (276 to 414 kPa.) If
the water pressure to the reverse osmosis system
is less than 40 to 60 psi (276 to 414 kPa):
• Check to see whether the sediment filter in the
reverse osmosis system is blocked. Replace
the filter if necessary.
• Allow the storage tank on the reverse osmosis
system to refill after heavy usage.
• If your refrigerator has a water filter, it may
further reduce the water pressure when used
in conjunction with a reverse osmosis system.
Remove the water filter.
If you have questions about your water pressure,
call a licensed, qualified plumber.
CONTROLLING THE
TEMPERATURE
RECOMMENDED FREEZER AND
REFRIGERATOR COMPARTMENT
TEMPERATURES
The recommended temperatures for the Freezer
and Refrigerator Compartments are -19 °C
and 3°C (-2 °F and 38°F) respectively. If the
temperature of the Freezer and Refrigerator
Compartments are too high or low, adjust the
temperature manually.
CONTROLLING THE FREEZER
TEMPERATURE
Freezer
The Freezer temperature can be set between -8°F
and 5 °F (or between -23 °C and -15 °C) to suit
your particular needs. Press the Freezer button
repeatedly until the desired temperature is shown
in the temperature display. The temperature will
change by 1 °F (or 1 °C) with each press.
See below.
Fahrenheit : 0 °F
➞
-1 °F
➞
-2 °F
➞
-3 °F
➞
-4 °F
➞
-5 °F
➞
-6 °F
➞
-7 °F
➞
-8 °F
➞
5 °F
➞
4 °F
➞
3 °F
➞
2 °F
➞
1 °F
➞
0 °F.
Centigrade : -18 °C
➞
-19 °C
➞
-20 °C
➞
-21 °C
➞
-22 °C
➞
-23 °C
➞
-15 °C
➞
-16 °C
➞
-17 °C
➞
-18 °C.
• The Freezer or Fridge temp indicator
will blink when the temperature in the
fridge or freezer compartment goes up
dramatically.
(Freezer or Fridge temperature indicator will stop
blinking when temperature in the Freezer or Fridge
becomes normal. If temperature indicator does not
stop blinking after several hours, please contact
your service center.
Power Freeze
The Power Freeze function substantially speeds up
the freezer compressor, causing the freezer to cool
down rapidly to a temperature you choose.
This icon will light up when you press and hold the
Freezer button for 3 seconds.
Power Freeze is useful if you need to quick freeze
an item, to make a large quantity of ice, or to cool
the freezer rapidly if it has warmed dramatically (for
example, if the door was left open).
To turn the Power Freeze function off manually,
press the Freezer button, and then re-set the
Freezer temperature.
Power Freeze turns off automatically after 50 hours
to decrease energy consumption.
When the Power Freeze function stops
automatically, it automatically sets the Freezer
temperature to -19 °C. Re-set the temperature if
necessary.
When you use this function, the energy
consumption of the refrigerator will increase.
If you need to freeze large amounts of food,
activate the Power Freeze function at least 20
hours before.
Recommended Temp (Freezer) : -2 °F (-19 °C)
DA68-02918A-02.indb 19 13. 12. 2. �� 5:05