Filter
Top Products
16_ Setting Up
Setting up your French Door Refrigerator
The left door is fixed. To make minor adjustments between doors, adjust only the right door.
2 fastener are enclosed with the refrigerator. The thickness of each fastener is 0.04”.
4 . After adjusting the doors, please insert the supplied fastener (
6
) using a pliers (
5
) in the gap between
the hinge-grommet (
7
) and the lower hinge (
8
). The number of fastener you’ll need to insert depends
on the gap.
1. Pull out the freezer drawer (
1
) to expose the lower hinge (
2
).
2. Insert the supplied allen wrench (3/16”) (
3
) into the shaft (
4
) of the lower hinge.
3. Please adjust the height by turning the hex wrench (
3
) clockwise (
) or counter-clockwise (
).
When you turn the hex wrench counter-clockwise( ), the door will move up.
2
3
4
3
1
7
8
3
6
5
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the refrigerator.
When the right
door is higher
than the left
door.
When the right
door is lower
than the left
door.
Fixed part
Adjustment
part