Filter
Top Products
02 OPERATING
USING THE CONTROL PANEL & DISPLAY
1 2 3 4 5 6
BA
Ice off Button
Press the Ice Off button (
1
) if you don’t want to make more ice. The icon (
) lights up and the Ice-Maker
stops making ice.
If the following occurs, turn off the ice maker.
- There is enough ice in the ice bucket.
- You want to save on water and energy.
- Water is not being supplied to refrigerator.
If ice maker function is ON, and the water line is not connected, you will hear a water valve noise
from the back of the unit. Press the Ice Off button until the ice Off indicator (
) illuminated.
If you want to fill the ice cube bucket to maximum capacity after installation, follow these steps:
1. After the refrigerator turns on for the first time, check the display to see whether the Ice Off light
is ON or OFF. If the Ice Off light is ON, press the Ice Off button.
2. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). Waiting 24hours will
allow your ice maker to cool properly.
3. After 24 hours or one full day, press the Ice Off button again.
• If ice doesn’t come out, press the test button located on the right side of ice maker.
• Do not press the test button continuously when the tray is lled
with ice or water. Water may overflow or the ice may become
jammed.
• Use only the ice maker provided with the refrigerator.
• The water supply to this refrigerator must be installed/ connected
by a suitably qualified person and connected to a protable water
supply only.
• To operate the ice maker properly, water pressure of 20~125psi is
required.
• Do not try to disassemble the ice maker.
CAUTION
CAUTION
Test button
Check the
water level
Operating your French Door Refrigerator
Operating _21