Samsung RFG29THD Refrigerator User Manual


 
setting up _07
01 SETTING UP
Slot
3
2. Disconnect one connector ( 3 ) on the right side
door and one connector ( 4 ) on left side door. To
remove the water coupler from the hinge, twist and
pull it from the hinge. Remove the water line ( 5 )
while pressing the marked part ( 6 ) of the water line
coupler.
If a red clip is on the coupler, it must be
removed before removing the tube.
3. Pull and remove the hinge lever ( 7 ). Remove the
ground screw ( 8 ) attached to the upper left and
right door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges ( 9 ).
4. Lift the door straight up to remove.
CAUTION
Allen wrenchAllen wrench
12
10
11
4
5
6
3
Red Clip Red Clip
(1/4")(1/4")
7
8
9
1
2
1
2
5. Remove the screw ( 10 ) attached to the lower left
and right door hinges with a philips screwdriver (+).
Remove the 2 hex head bolts ( 11 ) attached to
the lower left and right door hinges with an allen
wrench (3/16”). Remove the lower left and right
door hinges ( 12 ).
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved the
fridge to its fi nal location, assemble parts in reverse
order.
DISASSEMBLE THE FREEZER
DRAWER
1. Take out the upper drawer
by lifting it up.
2. Remove the tilting pocket
( 1 ) by pulling both support
guards ( 2 ) upward at the
same time.
3. Take out the lower basket
( 3 ) by lifting the basket up
from the rail system.
4. Remove 4 hex head bolts
from both sides with a socket
wrench (10mm).
5. Lift up the freezer door from
the rails.