6_ safety information
SEVERE WARNING SIGNS FOR
INSTALLATION
The installation of this appliance must be performed by a qualified
technician or service company.
- Failing to do so may result in electric shock, fire, an explosion, problems
with the product, or injury.
Unpack oven, remove all packaging material and examine the oven for
any damages such as dents on the interior or exterior of the oven, broken
door latches, cracks in the door, or a door that is not lined up correctly.
If there is any damage, do not operate the oven and notify your dealer
immediately.
Remove all foreign substances such as dust or water from the power plug
terminals and contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failing to do so may result in electric shock or fire.
Plug the power cord into a properly grounded outlet of standard. Your
oven should be the only connected on this circuit.
- Sharing a wall socket with other appliances using a power strip or
extending the power cord may result in electric shock or fire.
- Do not use an electric transformer. It may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as
those of the product specifications. Failing to do so may result in electric
shock or fire.
Keep all packaging materials out of the reach of children. Children may
use them for play.
This appliance must be properly grounded. Read and follow the specific
“Grounding Instructions” found in the beginning of this Section.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone
line.
- This may result in electric shock, fire, an explosion, or problems with the
product
- Never plug the power cord into a socket that is not grounded correctly
and make sure that it is in accordance with local and national codes.
Do not cut or remove the third (ground) prong from the power cord under
any circumstances.
Connect the oven to a 20A circuit. When connecting the oven to a 15A
circuit, make sure that circuit breaker is operable.
Do not install this appliance in a humid, oily or dusty location, in a location
exposed to direct sunlight and water (rain drops).
- This may result in electric shock or fire.
Plug the power plug into the wall socket firmly. Do not use a damaged
power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
Do not operate any other heating or cooking appliance beneath this
appliance.
Do not mount unit over or near any portion of a heating or cooking
appliance.
Do not mount over a sink.
Do not pull or excessively bend the power cord.
WARNING
SAVE THESE INSTRUCTIONS
SMH9187_XAC-03640B-EN-01.indd 6 2010-02-20 3:18:00