Filter
Top Products
BEFORE COMMENCING OPERATION
Installation site
To operate this unit property and
to
obtain maximum performance, install the unit
in
a location with the following
conditions.
<D
A location not subjected to direct sunlight
Installation
in
a location subjected
to
direct sunlight
may
lead·
to
inadequate cooling.
® A location with adequate ventilation
Leave at least 10cm around the unit for ventilation.
Poor ventilation result
in
a reduction of the refrigeration
capability.
@ A location far from heat generating sources
Avoid installing the unit near heat-emitting appliances
such as gas ranges or stoves. Heat
can
cause.
inefficient refrigeration.
@ A location with a sturdy and level floor
&'WARNING
o Be sure to install the unit
on
a sturdy floor.
If the floor is not strong enough or the
installation site
is
not adequate, this may
result
in
injury from the unit falling or tipping
over.
~CAUTION
o Select a level and sturdy floor for
installation. This precaution prevents the
unit from tipping.
Improper installation
may result
in
water spillage or injury from
the unit tipping over.
Install the unit
on
a sturdy floor
to
avoid vibration
and noise.
Placing the unit
on
an
unsteady floor
will cause vibration
and
noise.
8
@ A location not prone to high humidity
&'WARNING
'"
Do
not use the unit outdoors. Current
\.Y
leakage or electric shock may result if the
unit
is
exposed
to
rainwater.
'"
Never install the unit
in
a humid place or a
\.Y
place where it is likely to
be
splashed
by
water. Deterioration
of
the insulation may
resultwhich could cause current leakage or
electric shock.
'"
Do
not install the unit under the piping for
\.Y
water main and lor vapor. Deterioration of
. the insulation may cause current leakage
or electric shock.
@ A location without a flammable
or
corrosive gas
&'WARNING
'"
Never install the unit near a flammable or
\.Y
volatile location. This may cause
explosion or fire.
'"
Never install the unit where acid or
\.Y
corrosive gases are present as current
leakage or electric shock may
result due to
corrosion.