Filter
Top Products
.-;
OPERATING INSTRUCTIONS
I Temperature set
Set
up
of
chamber
tern perature
Table 1 and 2 show the basic operation method. Follow the key operation sequence indicated
in
the table. The
example
in
the table is based on the assumption that the chamber temperature set at 1
GOC.
The unit is set at the
factory to obtain the proper temperature
(5°C) automatically.
Table 1
For MPR-311 (H)
Operation Description
1
Connect the power
supply plug to a dedicated power The power supply lamp is lit.
supply outlet.
2
Set the temperature control knob to 1
GOC.
The chamber temperature is gradually decreased.
Note:
An accurate chamber temperature is necessary, put a standard thermometer at the center
of
the chamber. Refer to the
temperature
display
of
the thermometer for the setting
of
chamber temperature.
Table 2 For MPR-311 D(H), MPR-311 DR(H)
Operation
Description
1
Connect the power
supply plug to a dedicated power
Current chamber temperature is
displayed
on
the
supply outlet.
indicator.
(The
display is flashed when the
chamber tem perature is over
15°C
or
lower than
aOc.
2
Set the temperature control knob to 1
GOC
by using a
The chamber temperature is
gradually decreased.
screw driver with pressing the set button.
(The set temperature is
displayed while the set
button is pressed.)
12