Filter
Top Products
MAINTENANCE
&WARNING
..
Disconnect Always
~
supply to the unit
maintenance of the
disconnect the power
prior to any repair or
unit
in
order to prevent
electric shock or injury.
Cleaning
G) Clean this unit once a month. Regular cleaning
keeps the unit looking
new.
® Use a dry cloth
to
wipe off small amounts of dirt
on
the outside and inside of the unit
and
all accessories.
If
the unit
is
very dirty, use a neutral detergent.
® After cleaning, wipe away the cleaner completely
with a cloth washed
by
clean water.
'"
Ensure
you
do
not inhale or consume
\.y
medication or aerosols from around the unit a
. the time of maintenance. These may
be
harmful to your health.
@ Never pour water onto or into the unit. Doing
so
can
damage the electrical insulation and may cause
electric shock or short circuit.
@
The
compressor
and
other mechanical parts
are
completely sealed. This unit requires absolutely
no
lubrication. There
is
a
fan
behind the compressor,
so
be
very careful
if
you
stick your
hand
into this part of
the
unit.
Replacement
of
fluorescent light
G) Disconnect the power supply plug.
® Remove all shelves or drawers.
® Remove the two screws fixing the lamp shade.
@ Pull the fluorescent light downwards and take it
out.
@ Replace the light.
@ After the replacement, install the shade
to
it
original
position.
Cleaning
of
evaporating tray
G) Clean the evaporation tray twice or three times
in
a
year. The evaporating tray is placed
in
the rear
and
bottom side
of
the unit.
® Remove the fix plate
by
pulling the clip towards front.
®
Pull
the evaporating tray towards front
and
clean it
completely.
@ After the cleaning, replace the fix plate
to
its original
position.
14