Filter
Top Products
21
ROUTINE MAINTENANCE
Clean the evaporating tray once a month following the procedure below.
Cleaning of evaporating tray
1. Remove the screws on the bottom of the unit cover
and remove the cover. See Fig. 1.
2. For model MPR-513 and MPR-513R, remove the
evaporating tray mounting plate by pulling out the
clips towards front. Then take out the evaporating
tray as shown in Fig. 2 and Fig. 3.
For MPR-1013 and MPR-1013R, as shown in Fig. 4,
pull out the evaporating tray by lifting up and pulling
out towards front.
3. Wash away any accumulated dirt in the evaporating
tray with a neutral detergent and clean water. Never
use the hot or boiled water to clean the tray.
4. Replace the tray in it original position and attach the
unit cover.
Fig. 1
Fig. 3
Fig. 4
Fig. 2
Clips