Filter
Top Products
OPERATION: Ice Vending
Dispensing takes place when the
Touch Free sensor’s infrared beam
bounces back to the sensor from a
container placed directly in front of
it.
If the container is in front of the
Touch Free sensor on the left side,
the ice dispensing vane will rotate
and sweep ice over the ice
dispensing chute: ice will continue
to discharge out this chute as long
as the vane is turning. It stops
when the dispensing vane stops.
If the container is in front of the
Touch Free sensor on the right
side, the inlet water valve will open
and water will flow into the
container.
MDT5N25 & MDT5N40
May 2001
Page 16
ICE DISPENSING
VANE
BIN BOTTOM
DRIVE
MOTOR
ICE CHUTE
TOUCH FREE
SENSOR
SINK
The Touch Free System:
Hold or Place a Container in Front
of The Touch Free Sensor & Under
The Ice or Water Spout;
Ice or Water Will Be Dispensed
Without Touching The Dispenser
TOUCH FREE
SENSOR