Filter
Top Products
TO SET SELF=CLEAN CYCLE:
1. Close oven door. The door locks automatically after
control Is set.
2. Push CLEAN. The time display will show (.... ). See
Fig, to
Fig. 1 (_)
3. Press the UP or DOWN arrow pad to set the desired
length of clean time. Clean time Is normally 3 hours.
You can change tt between 2 and 4 hours, depending
on how dirty the oven is. See Fig. 2o
TO _NTERRUPT A CLEAN CYCLE:
1. Push CLEAR.
Follow instructions under "WHEN A CLEAN
CYCLE HSFiNiSHED".
TO SET DELAYED SELF-CLEAN
CYCLE:
Follow steps 1-3 under "TO SET SELF.CLEAN
CYCLE", THEH:
4. Press STOP TIME=
5. Set the time of day when you want the clean cycle to
end. See Fig= 4=
The control will calculate the start clean time.
INCREASE OR DECREASE
Fig. 2
You can push STOP TIMS to find out when the cycle
will end. Push CLEAN to return to countdown.
CLEAN TIME
WHEN A CLEAN CYCLE _$
FmHflSHED:
1. Wait untll the LOCK display goes out. Allow 30
minutes for oven to cool. The oven temperature must
drop to a safe level before the door can be opened.
See Fig, 3.
(_)WAIT UNTIL LOCK GOES OUT
INCREASE OR DECREASE
CLEAN TIME
SET TIME OF DAY YOU
WANT CLEAN CYCLE TO END
Note:When selecting a stop time for a
delayed clean cycne, you must allow
time for the 2.4 hour clean t_nte,
"Door" will flash in display if you forget to lock the door.
NOTE:Your oven light should be OFF during a
self-clean cycle to prolong the life of the
bulb.
Fig° 3
I4 NCSCL07