Filter
Top Products
R MOVABLE OVEN RACKS
Be carefuU not to scratch the oven finish when
installing or removing oven racks.
To instaU:
1. Set the raised back edge of the rack on a pair of rack
guides.
2. Push the rack in until you reach the bump In the rack
guide, then lift the front of the rack and push the rack
all the way In.
To remove_ =
1. Pull the oven rack out, then up.
Some models have one standard oven rack and one
folding oven rack.
The folding rack can be easily stored away when not In
use.
NOT_: For best pe_omtance_ remove oven racks
during a clea- cycBe. Jf oven racks are _eft in the
range dudng a seN-cDean c¥cRe, they will darken,
lose their luster and become hard to slide= H you
choose to aeave the racks in the oven, you can
polish 1the edges of the racks with steel wood and
apply a smi! amount of vegetable oig to the rack
edges after the self-c_ean cycle.
BUMP
IN RACK
GUIDE _
RE,lOVABLE OVI N DOOR
To remove:
,
2_
NOTE:
Open the door to the stop position (see illustration).
Grasp the door at each side and Siftup and off the
hinges.
When the doo_" is removed and hinge
arms are at stop position, do not bump or
try to remove the hinge arms. The hinges
could snap back causing an injury to the
hands or damage to the porcelain on the
fro,t of the range= Cover the hinges with
toweling or empty rowe! roils while
working in the over, area.
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The hinge arms must still be in the stop
position.
2. Slide the door down onto the hinges as far as it will
go and close the door,
STOP (BROIL) POSITION
16 NCMNT02