Filter
Top Products
TEMPERATURE CONTROLLED "MULTI-POWER"
COOKING
The "'Temperature Controlled Meat Cooking Guide" and "Reheating Guide" on Pages 17 and ]S will show you which
multi-power setting and temperature setting are re_:ommended for the food you are cooking.
I. Place the temperature probe into the food with the
first inch of the sensor in the center of the food. See
step 1 on page 19.
2. Plug the temperature probe into the socket on the side
of the oven. See step 2 on page 19.
CAUTION: Do not plug the pointed end of the tern-
perature probe into the socket.
3. Touch CLEAR.
4. Touch TEMP CONTROL.
The lights above TEMP and
below COOK I will go on,
and "F" will show in the
display window.
5. Choose the food tempera-
ture and touch the corres-
ponding numbers. For
example, if the recipe calls
for doneness at 155°F. you
would touch numbers "I"
"5" and "5", When you
touch "155", the display
window will show "'155F", If
the temperature probe is not
plugged into the socket, the
probe light will flash and the
oven will not work.
--Kenmore --
L AUlO Re¢il_e 3_
_ CK317_'-;
6. Touch POWER CONTROL.
The light above POWER will
go on. Also, the word "HI"
will show in the display
window until you enter a
lower power setting. This is
to remind you that the oven
will always operate at full
power unless you set a lower
power.
7. Choose the power control
setting you desire and touch
the corresponding numbers.
For example, if the recipe
should call for cooking at the
"70 (ROAST)" setting, you
would touch numbers "7"
and "0". When you touch "7"
and "0", the display window
will show "70". This means
that in the "70 (ROAST)"
_etting the oven is at power
zvel 70.
-- l._enmor,_ --
8. Touch START. The oven will
begin to cook and you will be
able to see the temperature of
the food rising in the display
window.
KenmorQ
( Auto R_ipt 300 1
9. A tone _ll sound and the word
"End" will show in the Display
Window for 2 seconds when
the desired temperature is
reached.
( Au=o R_i_ 300 )
NOTE: If you want to keep the food warm after finishing
the cooking cycle, you can use "Hold Warm" feature. For
detailed instructions on using "Hold Warm" feature, See
page 12.
The highest temperature that can be set is 200°F.
The temperature is displayed in I°F increment.
2O