Filter
Top Products
OVENCONTROL,CLOCKand KITCHENTIMERcontinued
Your new control has a series of tones that will
• sound at different time& These tones may
sound while you set the control for an oven
function, or at the end of the oven function, it
will also alert you there may be a problem with
the functions. Below are the types of tones
and a brief description of each
TONES WHILE SETTING THE
CONTROL
When .you press a touch pad you will hear a
beepA This beep will let you know you have
placed enough pressure on the pad to
activate it. (The arrow pads do not beep,)
END OF TIMED CYCLE TONE
At the end of a timed cooking function, you will
hear 3 short beeps followed by I beep every
6 seconds,, This 6 second beep will continue
to sound until the CLFd&R/OFF pad is pressed
or you may select the special feature to cancel
this 6 second beep from sounding at the end
of future cycles,
TO CANCEL THE 5 SECOND BEEP
t. Press and hold the BAKE and BROIL
pads, at the same tKrne for 3 seconds,
until the display shows "SF"_
2. Press the KITCHEN TIMER ON!OFF
pad, The displaywill show "CON BEEP"
(continous beep),
3. Press the KITCHEN TIMER ON/OFF
pad again. The display will show"BEEP"
(beep canceled),
4. Press the START pad
tf you would like to return the 6 second beep
repeat steps above until the display shows
,your choice and press start°
ATTENTION TONE
This tone will sound ff you make an error or an
oversight is made while setting an oven
function_
Examples would be: ...................
a, Setting a function and not pressing the
START pad,
b, Pressing an additional function pad
without setting a temperature or time first.
Any of these can be quickly identified by
watching the display
PRENEA T TONE
When .you set an oven temperature, the oven
automatically starts to heat_ When the
temperature inside the oven reaches the
temperature.you have set, a tone will sound to
let you know the oven is ready for baking
If you set an oven function and the control
beeps while the display is flashing "F" and a
number "F.4" or letter "FI" there may be a
problem with the control or oven Simp!y press
the CLEAR/OFF pad and wait about an hour.
Try setting the function again1 If the code
repeats, write down the flashing code and call
for service., Tell the technician what the
code was flashing,
9