Filter
Top Products
14
Using the receiver
Switching the receiver on/off
The receiver can only be switched off when the standard
display is shown on the display panel. When in the
operating menu, briefly pressing the ON/OFF button will
cancel your entry (ESC function) and return you to the
standard display with the last stored settings.
Note:
Remove the batteries or the accupack when the receiver
will not be used for extended periods of time.
̈ Press the two unlocking buttons µ and open the
battery compartment cover ¾.
̈ Press the ON/OFF button ¸ to switch the receiver on.
The red LED » lights up.
̈ To switch the receiver off, press the ON/OFF button ¸
until “OFF” appears on the display. The red LED » goes
off.
̈ Close the battery compartment. The battery
compartment cover ¾ locks into place with an audible
click.
Connecting the headphones
̈
To monitor the audio signal, connect headphones with a
3.5 mm jack plug to the headphone output (PHONES)
ᕡ
.
µ
¾
¸
»
³