Sennheiser EK 500 G2 Ventilation Hood User Manual


 
4
The EK 500 G2 receiver
The EK 500 G2 bodypack receiver is part of the evolution
wireless series ew 500 G2. With this series, Sennheiser
offers high-quality state-of-the-art RF transmission
systems with a high level of operational reliability and ease
of use. Transmitters and receivers permit wireless
transmission with studio-quality sound. The excellent
transmission reliability of the ew 500 G2 series is based on
the use of
y further optimized PLL synthesizer and microprocessor
technology,
y the HDX noise reduction system,
y the pilot tone squelch control,
y and the sc an function for scanning the channel ba nks for
free channels.
The channel bank system
The receiver is available in five UHF frequency ranges with
1440 receiving frequencies per frequency range. Please
note: Frequency usage is different for each country. Your
Sennheiser agent will have all the necessary details on the
available legal frequencies for your area.
Range A: 518 to 554 MHz
Range B: 626 to 662 MHz
Range C: 740 to 776 MHz
Range D: 786 to 822 MHz
Range E: 830 to 866 MHz
The receiv er has nine cha nnel banks with up to 20
switchable channels each.
Each of the channels in the channel banks “1” to “8” has
been factory-preset to a receiving frequency (see enclosed
frequency table). These receiving frequencies cannot be
changed but have been preset so that e.g. country-specific
regulations on frequency usage are taken into account.
The channel bank “U” (user bank) allows you to store your
selection out of 1440 receiving frequencies that are freely
selectable within the preset frequency range.
channel bank 1...8
channel bank U
channel 20
preset frequency
channel 1
channel 2
preset frequency
preset frequency
channel 20
channel 1
channel 2
freely selectable frequency
freely selectable frequency
freely selectable frequency