Filter
Top Products
Page 12
WEIGHT= XX.X LB
AUTOMATIC
?
#
>>>>> ENTER
WEIGHT= XX.X LB
SETUP
?
#
ENTER
FILTER HOURS=
XX.X HOURS
>
TOTAL RECYCLED=
XXXX.X KG
>
TOTAL CHARGED=
XXXX.X KG
>
ACCESS STORED DATA
1. Set up the AC880 and turn the Main Power Switch ON.
2. Using the Keypad, press the “Up Arrow” key five times to display
“WEIGHT= XX.X LB” “SETUP? #” and then press the ENTER key. The
Display will read “FILTER HOURS=” “XX.X HOURS”.
See the Filter Maintenance section of the manual, Page 14, for the
procedure to change the filters. The normal Filter Change Interval is after
every 25 hours.
Note: Press and hold the “Right Arrow” key and press the RESET key
to remove the “CHANGE FILTERS #” message.
3. Press the “Up Arrow” key. The Display will read “TOTAL RECYCLED=”
“XXXX.X KG”.
4. Press the “Up Arrow” key. The Display will read “TOTAL CHARGED=”
“XXXX.X KG”.
5. Press the “Up Arrow” key to return to the Main Menu.