Filter
Top Products
[3] SET UP
1. Procedures on the copier (operation panel)
∗ When installing the LCD panel kit simultaneonsly.
A. Copier operation panel disassembly
• Remove screws and connector, and remove the operation
panel.
B. Cover disassembly
• Remove screw and disengage pawls, and remove the cover.
C. Printer operation panel installation
• Engage pawls and fix the printer operation panel with screw.
Then connect the flat cable to the connector.
2. Procedures on the copier (rear side)
A. Copier rear cabinet disassembly
• Remove screws and remove the rear cabinet.
AR-PB8
3 – 1