Filter
Top Products
DATA
LINE MENU ITEM
ENTER
DATA
NE MENU ITEM
ENTER
4) Press the Left or Right arrow key to change the setting.
• The current value is marked with an asterisk (∗).
5) After choosing the required value, press the ENTER key.
• The new value is registered.
A. Main Menu
Item
Possible
Settings
Description
Copies 1 ∼ 999 Sets how many copies to print.
Resolution
600dpi
300dpi
Sets the printing resolution.
Smoothing
On
Off
Sets whether smoothing is done or not.
This function improves the appearance
of printed documents by smoothing the
angles and curves of images. This
allows printing at a higher apparent
resolution. For example, if the printer is
set to 600dpi, resolution equivalent to
1200dpi can be achieved.
When printing image data, you may
need to select "Off" to achieve best
results.
Toner Save
On
Off
Sets whether toner save mode is in
effect or not. This function prints slightly
fainter to save toner. This item is
different from the copier “toner save
mode”.
Page
Protection
On
Off
Sets page protection. Page protection is
a function designed to prevent data loss
errors when complex data is printed.
This menu item is displayed only if the
installed printer memory is 24MB or
more.
2-Sided
Printing ∗B
On
Off
Setting of duplex function and binding
direction.
Paper
Source
Auto
Tray 1
Tray 2∗
Tray 3∗
Tray 4∗
Bypass Tray
Sets the tray used for paper feeding.
Setting to “Auto” automatically selects
the paper tray loaded with the paper of
the size specified in the “Paper Size”
item.
∗ The available settings reflect the
installed trays.
Item
Possible
Settings
Description
Paper Size
A3
B4
A4∗
B5
A5
Ledger
Legal
Letter∗
Executive
Folio
Invoice
Foolscap
COM-10
DL
C5
Sets the size of the paper where data
will be printed. If this size is different
from the paper size present in the tray,
the size set on the operation panel takes
precedence.
∗ Depending on where the printer was
purchased, the default value is either A4
or Letter.
Orientation
Portrait
Landscape
Sets the page orientation for printing.
Specify “Portrait” to print the paper with
its long side (longer edge) vertical.
Specify “Landscape” to print the paper
with its long side (longer edge)
horizontal.
Emulation
Auto
PCL
HEX
Specifies the printer language used.
B. Network Menu
Item Setting Choice Description
Set IP Address
Yes
No
Sets the IP address.
Set Subnet Mask
Yes
No
Sets the subnet
mask.
Set Default Gateway
Yes
No
Sets the default
gateway.
Enable TCP/IP
YES
NO
Enable/Disable
TCP/IP
Enable Netware
YES
NO
Enable/Disable
Netware
Enable EtherTalk
YES
NO
Enable/Disable
EtherTalk
Reset to Defaults
YES
NO
Reset Print Server
Card to default.
∗ Displayed only if the optional Network Interface Control card is
installed.
C. Interface Menu
Item Setting Choice Description
I/O Time Out
1 second
:
60 second
:
999 second
Sets I/O time-out. If
no data is received
within the preset
time, print
processing is ended.
D. Test Menu
Item Description
Configuration Page Prints the configuration page.
PCL6 Font List Prints the PCL6 font list.
PS2 Font List∗1, ∗A Prints the PS2 font list.
∗ 1 Displayed only when the PS Kit (AR-PS1) is installed.
E. PS2 Menu ∗A
Item Description
Print PS2 Error When set to “On”, PS error print is made.
∗ Displayed only when the PS Kit (AR-PS1) is installed.
AR-PB8
4 – 2