Filter
Top Products
1 Enter cooking time by touching
number pads 500.
2 Touch Power Level 3 times to choose
70%. You can omit this step when you set
100% power. Touch Multiple Sequence.
3 Note that 100% stage 2 appears in the
banner.
4 Enter second cooking time 3000. 5 Touch Power Level until 50% Stage 2
appears in the display. Touch START.
6 The display will begin counting down
the total cooking time.
During cooking, the power level will
appear in the display. At the end of
Stage 1, the microwave will automatically
change to Stage 2.
17
MICROWAVE DRAWER COOKING
MULTIPLE SEQUENCE COOKING
The Microwave Drawer can be programmed for up to four automatic cooking sequences, switching from one power level setting
to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power
level. Your Microwave Drawer can do this automatically.
• Suppose you want to cook roast beef for 5 minutes at 70% power and then continue to cook for 30 minutes at 50% power.
TOUCH POWER
LEVEL PAD NUMBER
OF TIMES FOR
DESIRED POWER
APPROXIMATE
PERCENTAGE
OF POWER
COMMON
WORDS FOR
POWER LEVELS
If Power Level is not touched 100% High
Power Level x 1 90%
Power Level x 2 80%
Power Level x 3 70% Medium High
Power Level x 4 60%
Power Level x 5 50% Medium
TO SET POWER LEVEL
There are eleven preset power levels.
Using lower power levels increases the cooking time, which is recommended for foods such as cheese, milk and long slow
cooking of meats. Consult a microwave cookbook or recipes for specific recommendations.
TOUCH POWER
LEVEL PAD NUMBER
OF TIMES FOR
DESIRED POWER
APPROXIMATE
PERCENTAGE
OF POWER
COMMON
WORDS FOR
POWER LEVELS
Power Level x 6 40%
Power Level x 7 30% Med Low/Defrost
Power Level x 8 20%
Power Level x 9 10% Low
Power Level x 10 0%
Power Level x 11 100% High