Sharp R-2110J Microwave Oven User Manual


 
20
BEFORE OPERATING
Before operating your new microwave oven make
sure you read and understand this operation manual
completely.
Before the oven can be used, follow these proce-
dures:
1. Plug in the oven. Close the door. The oven display will
show
.
2. Touch the STOP/CLEAR pad.
:
will appear.
3. Set clock.
TO SET THE CLOCK
Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
ERROR
will appear in the display.
Touch the STOP/CLEAR pad and re-enter the time.
If the electrical power supply to your microwave
oven should be interrupted, the display will intermit-
tently show
after the power is reinstated.
If this occurs during cooking, the program will be
erased. The time of day will also be erased. Simply
touch STOP/CLEAR pad and reset the clock for the
correct time of day.
NOTE:
Your oven can be programmed with the door
open except for using START/MINUTE PLUS, KEEP
WARM and POPCORN.
ENJOY YOUR OVEN PRESS CLEAR AND
PRESS CLOCK
3
Touch TIMER/CLOCK pad again.
TIMER
CLOCK
12:30
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
STOP/CLEAR
PROCEDURE DISPLAY
1
2
Touch TIMER/CLOCK
pad and number 2.
Enter the correct time of day
by touching the numbers in
sequence.
TIMER
CLOCK
TO SET
CLOCK
PRESS 2
1 2 3 0
ENTER
2
TIME
ENJOY YOUR OVEN PRESS CLEAR
AND PRESS CLOCK
R-2110J manual#372 5/10/04, 2:44 PM20