Sharp R-33STD Appliance Trim Kit User Manual


 
7
STOP KEY
SETTING THE CLOCK
ENGLISH
Example:
To set the 24 hour clock to 23:35
1. Choose the 24-hour clock
by pressing the CLOCK
key twice.
2. Set the hours:
Press the 10 MIN key twice.
Press the 1 MIN key three times.
3. Change from hours to
minutes by pressing the
CLOCK key once.
NOTE:
1. Press the STOP key if you make a mistake during
programming.
2. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
3. When you want to reset the time of day, follow the
above example again.
There are two setting modes: 12 hour clock and 24 hour clock.
1.
To set the 12 hour clock, press the clock key once
will
appear in the display.
2.
To set the 24 hour clock, press the clock key twice
will
appear in the display.
x1
To set the clock, follow the example below.
Use of the STOP key:
1. Erasing a mistake during programming.
2. Stopping the oven temporaily during cooking.
3. Cancelling a programme during cooking by
pressing the STOP key twice.
x2
x2 x1
5. Start the clock by
pressing the CLOCK
key once.
Check the display
x1
x3x2
4. Set the minutes:
Press the 10 MIN key three times.
Press the 1 MIN key five times.
x5x3
R-33STD English 10/12/2002 15:19 Page 7