Filter
Top Products
Instructions for the User
10.5.2 Setting the cleaning cycle with electronic analogue clock
FUNCTION SELECTOR KNOB
FUNCTION SELECTOR KNOB
Turn the function selector knob to the symbol and keep pressing on
the symbol . The display will be as shown in figure 1 with the figure 1
flashing and the segments up to 6 lit, showing the minimum duration of
the pyrolysis procedure (1 hour and a half). Press the key within 1/2
seconds to increase the duration of this operation up to a maximum of
three hours. Figure 2 shows a cooking duration of 2 hours and 40
minutes.
6/7 seconds after the knob has been turned to the
symbol or the
pyrolysis duration has been set, the oven will start the cycle. One of the
illuminated segments will go out each time a minute passes.
The start of the pyrolysis cycle can be programmed within the next 12
hours.
After setting the pyrolysis duration, press the
key and set the pyrolysis
start time by pressing the
/ keys.
The internal segments will remain on and the external ones will flash until
the current time is the same as the cycle start time.
77