Filter
Top Products
Instructions for the user
18
12.6 Removing door
Open the door completely and fit the pins (supplied) into the holes from the inside. Close the door to
an angle of about 45°, lift it and remove it from its seat. To replace, fit the hinges into the grooves
provided, then lower the door until it comes to rest and extract the pins. If the pins are lost, two
screwdrivers can also be used.
12.7 Oven door seal
To permit thorough cleaning of the oven, the seal may be removed. Before
removing the seal, take off the door as described above. Once the door has been
taken off, lift the tabs at the corners as shown in the figure.
After cleaning, refit the seal with the longer side horizontal and insert the tabs into
the appropriate holes starting from the top ones.
12.8 Lubrication of the taps
In time the taps may be difficult to turn or may be blocked. Clean them inside and
replace the lubrication grease. This operation should be carried out by a specialised
technician.