Filter
Top Products
Instructions for the installer
83
4.4 Arrangement of the burners on the cooking hob
BURNERS
1. Auxiliary
2. Semi rapid
4. Ultra-rapid
BURNERS
1. Auxiliary
2. Semi rapid
3. Rapid
4. Ultra-rapid
4.5 Oven burner adjustment (only for models with a gas oven)
To adjust the oven burner you need to open the oven door and carry out
the following operations:
• Remove the oven basin and its rack.
• Lift up the oven surface and pull it outwards.
4.5.1 Replacing the oven burner nozzle
• Loosen the oven burner fixing screw A.
• Push the burner B towards the right until the nozzle is accessible.
• Using a 13 socket spanner replace the nozzle, inserting a new nozzle
suitable for the type of gas to be used (see paragraph “3.2/3.3 Burner
and nozzle characteristics table”).
4.5.2 Primary air adjustment for the oven burner
• Loosen the adjustment screw “A” of the air regulation sleeve.
• Turn the adjustment sleeve “B” to the position that corresponds to the
type of gas to be used according to the table below.
• Tighten the adjustment screw and restore the seals.
• When the operation is completed, reassemble the burner correctly.
NATURAL GAS G 30/31 (LPG) G 110 – TOWN GAS
X= 5 mm 10 mm 3 mm