Filter
Top Products
Instructions for the user
93
10.2.2 Burner caps and flame spreader crowns
For easier cleaning, the caps and the flame spreader crowns can be removed;
wash them with warm water and a non-abrasive detergent making sure to
remove any encrustation and wait until they are perfectly dry.
WARNING: never wash these parts in a dishwasher.
They can be left to soak with warm water and detergent.
Replace the flame spreader crowns, making sure that they are correctly in place
with their respective burner caps, making sure that the holes A in the flame-
spreaders are aligned with the igniters and thermocouples.
10.2.3 Igniters and thermocouples
For correct operation, on those models that have them, the igniters and thermocouples
must always be perfectly clean. Check them frequently and clean them with a damp cloth
if necessary. Remove any dry residues with a wooden toothpick or a needle.
10.3 Cleaning the oven
For best oven upkeep clean regularly after having allowed to cool.
Take out all removable parts.
Clean the oven racks with hot water and non-abrasive detergent. Rinse and dry.
10.4 Cleaning the door glazing
The glass in the door should always be kept thoroughly clean. Use absorbent kitchen roll; remove
stubborn dirt with a damp sponge and an ordinary detergent.