Filter
Top Products
Instructions for the user
7
5. ELECTRONIC ANALOGUE CLOCK (ONLY ON SOME MODELS)
The programmer user instructions are valid only for the large oven.
LIST OF FUNCTIONS
MINUTE-MINDER BUTTON
AUTOMATIC DURATION / AUTOMATIC STAR TIME BUTTON
TIME SETTING AND RESET
DECREASE TIME BUTTON
INCREASE TIME BUTTON
5.1.0 Setting the time
When the oven is used for the first time, or after a power failure, the display flashes on and off at
regular intervals. Press the
key for 1 to 2 seconds to stop the display flashing and start setting of
the current time. Press the
or keys to increase or decrease by one minute each time a key is
pressed.
Press one of the two value modification keys until the current time appears. The clock will start from
the time set 6/7 seconds after the last key is pressed.
At the end of each programmed cooking operation, an intermitant alarm will sound 3 to 4 times at
intervals of about 1 and a half minutes. The beeps can be stopped at any moment by pressing any
key.
5.1.1 Minute-minder
This function does not stop cooking but just triggers the alarm.
- When the
key is pressed the display illuminates, appearing as shown in
figure 1;
- Press the
or keys within 6 to 7 seconds to set the minute-minder.
Whenever a key is pressed, 1 outside segment, representing 1 cooking
minute will light up (figure 2 shows 10 cooking minutes).
- The countdown will start 6 to 7 seconds after the last key is pressed; at the
end of it, you will hear the alarm.
- During cooking with countdown, the current time can be displayed by
pressing the
key once; press again to return to the minute-minder display.
- At the end of the countdown, the oven has to be switched off by hand,
by turning the thermostat and the function selector to 0.
1
2