Filter
Top Products
User instructions
34
ADDITIONAL FUNCTIONS (Customizing the consumer parameters)
The electronic control system allows personalizing the machine use directly through a
programming procedure not directly accessible that allows: regulate water hardness level.
To access the programming environment, the
appliance
must
be turned
on with the
door open
.
Then proceed as follows:
•
press the
ECO DRY (4)
button until the
H
symbol appears on the display, followed by the
number 3, >
H3
;
•
press the
PROGRAM DELAY (5)
button the number of times needed to select the right setting
level for the hardness of the water (
H0, H1, H2, H3, H4, H5
);
•
press the
START/STOP (6)
button to confirm the setting and return to the program setting
menu.
N.B.:
after 2 minutes, the appliance exits the parameter setting menu automatically.
WATER HARDNESS TABLE
WATER HARDNESS
German Degrees (°dH) French Degrees (°dF)
SETTING
0 - 4 0 - 7 .h 0
5 - 15 8 - 25 .h 1
16 - 23 26 - 40 .h 2
24 - 31 41 - 60 .h 3
32 - 47 61 - 80 .h 4
48 - 58 81 - 100 .h 5
Contact your local water board for information on the hardness of your water supply.